Three Casting Methods For Copper Sleeve Processing.

  There are generally three casting methods for copper sleeve processing, which prove to be suitable for casting copper castings. Metal casters can be tested in different ways and should not be restricted.

Bronze copper castings are usually cast with lost wax casting, but can also be used for brass and really for any other metal. By using a wax mold, covered with a ceramic shell, the craftsman can inject molten alloy to replace the wax. A small and noisy shell will reveal a yellow copper sheet. Lost wax casting requires a high degree of attention to detail when used. Artists or metal casters who create decorative copper pieces or sculptures will find that the lost wax casting technique will meet their needs much better than other techniques and methods.

Another method is used for die casting copper castings. Die casting is commonly used in commercial foundries, because the initial start-up costs are small for the foundry. By creating a reusable mold from steel, the caster will be able to create products with the same score. If the caster or artist plans to make a multiple of a product, you can find a viable market where the mold is cast in brass.

Sand casting is probably the oldest casting and is still a commonly used method, especially for small foundries. Pour brass into the sand mold to create a unique appearance, which may be the first choice of artisans. Sand casting of copper castings is often the most economically sensible small foundry. If castings are not incredibly attractive, then this method is much desirable.

Jiaxing Rongchang Bearing is a company specializing in the production of sliding bearings, and is an enterprise registered and approved by the relevant state departments. Main products: copper sleeves, copper bushes, copper slides, copper sliders, copper worm gears, sliding bearing seats and other copper products. The company adopts advanced production technology-centrifugal casting. The copper sleeves and copper bushes produced can significantly improve the compactness and wear resistance of castings compared with sand casting, and have good tensile strength and flexural strength. And stretch rate. The material of the copper sleeve is brass, tin bronze, aluminum bronze, etc. The company abides by the principle of "integrity first, customer first" and has established long-term friendly cooperative relations with many enterprises. We warmly welcome friends from all walks of life to visit, investigate and negotiate business.